Install Microwave

posted Nov 2, 2009, 7:38 AM by Quoc-Anh Vuong   [ updated Nov 8, 2009, 4:16 PM ]
Clean & install

Cleaning
  1. Need to bring:
    1. 409 cleaning solution
    2. Old t-shirt, cut up into 3 pieces
    3. Vinegar
  2. Apply 409 to inside & clean
  3. For chrome rust, may need to apply vinegar & let it stay for 15-30 minutes.
Installation
  1. Tools
    1. Saws (circular & sliding compound)
    2. Drill
    3. Phillips screw drive bit
  2. Materials
    1. 1x2
    2. 3/4" plywood, enough for 24" x 34"
    3. Wood screws, 1-1/2"
    4. Wood glue
  3. Measure, cut & install three 1/2 strips
  4. Measure, cut & install support shelf
This task took me, Bảo & Thuỵ a good 4 hours to
  1. Removed microwave
  2. Removed microwave front panel
  3. Ran home to get the key to the tool shed to get the ladder
    1. Bảo & Thuỵ Raked the leaves
  4. Disconnect wall oven electricity (upper shelf)
  5. Removed the oven
  6. Measured & cut & install the shelf to support the microwave
  7. A trip to HD to get pan head screws (#4 & #6 1/2")
    1. Filled up gas for the van
  8. Installed the the microwave support shelf
  9. Drilled new holes for front panel
  10. Installed front panel
  11. Installed wall oven
  12. Re-connect wall oven eletrical
  13. Installed wood panel
Comments